Cyprus Journal of Medical Sciences

Advancements in 3D Printing Technology: Applications and Options for Prosthetic Dentistry


Department of Prosthetic Dentistry, Near East University Faculty of Dentistry, Nicosia, Cyprus

Cyprus J Med Sci 2020; 5: 176-182
DOI: 10.5152/cjms.2020.1521
Read: 261 Downloads: 152 Published: 29 June 2020

The use of additive manufacturing systems in dentistry is becoming a widespread phenomenon. Additive manufacturing technology is defined as the fabrication of a 3D model or prototype by agglomerating the biomaterials layer by layer in a specific pattern dictated by the computer-aided design software. With the aid of this technology; structures with superior biocompatibility are rapidly, precisely, and inexpensively fabricated for direct medical utilization. In contemporary dentistry, manifold additive manufacturing techniques have been developed for the fabrication of fixed prosthetic restorations, removable dentures, surgical guides, individualized implants, custom impression trays, and anatomical models. Of these; stereolithography, selective laser sintering, selective laser melting, fused deposition modeling, and electron beam melting are commonly used. However, scientific data regarding their material options and working principles are still insufficient. Therefore, the aim of this review is to study the current status of common additive manufacturing techniques in prosthetic dentistry.

Cite this article as: Önöral Ö, Abugofa A. Advancements in 3D Printing Technology: Applications and Options for Prosthetic Dentistry. Cyprus J Med Sci 2020; 5(2): 176-82.

ISSN2149-7893 EISSN 2536-507X